• Order
  • USA
  • Offers
  • Support
    • Due to unforeseen circumstances, our phone line will be unavailable from 5pm to 9pm GMT on Thursday, 28th March. Please be assured that orders will continue to be processed as usual during this period. For any queries, you can still contact us through your customer portal, where our team will be ready to assist you.

      March 28, 2024

  • Sign In

Disclaimer: This is an example of a student written essay.
Click here for sample essays written by our professional writers.

Any scientific information contained within this essay should not be treated as fact, this content is to be used for educational purposes only and may contain factual inaccuracies or be out of date.

Manufacturing Process of Bricks

Paper Type: Free Essay Subject: Construction
Wordcount: 4010 words Published: 2nd Aug 2018

Reference this

A brick has been a common construction material used everywhere for more than 6000 years, and has been in various shape, sizes and were made by mixing many different type of materials, each of them having their own advantage and disadvantage; and formed the basic structure and the “back bone” of many civilisations and was used in a wide range of buildings in centuries from building palaces, housing factories, in tunnels construction, water ways, bridges, making it the oldest manufactured building material. For centuries, the brick making process was done by hand, and involved clay being moulded and then dried in the sun until the industrial revolution when the process turned to mechanization. Today technological and mechanical advancement has helped to have a more complete knowledge of the raw material and its properties, and better control of firing, improvement in the kiln designs, all have contributed to the advancement of brick quality and has made contemporary bricks more efficient and has improved the overall quality of the products.

Today, brick is found in various materials and made in various shapes depending on the use. There are concrete brick, calcium silicate brick, clay brick and Adobe brick. See Appendix 1

This report will be looking at the technology associated with the manufacturing process of automated and traditional soil clay brick, “adobe” brick – plain mud brick which are still use today in certain part of the globe or sometimes and “slump brick”- and the future of brick.

PART ONE

MANUFACTURING PROCESS OF AUTOMATED BRICK

The first stage in the manufacturing process of the soil clay brick start with the selection of the raw material.

RAW MATERIAL

The main raw material in brick making is clay and it is one of the most abundant natural mineral materials on the planet. On earth, there is a wide range of clay which varies considerably in physical properties, colour, hardness and mineralogical content; making it difficult to pinpoint particular clay and say this is the best clay for brick making but they do, however, have certain properties in common.

Get Help With Your Essay

If you need assistance with writing your essay, our professional essay writing service is here to help!

Essay Writing Service

PROPERTIES and TYPES OF CLAYS

Clay is complex material as individual, and their deposits is unique due to their specific modes of formation and physical characteristics, and are rarely present as pure minerals but rather are mixtures of the different clay types of one group or type normally being dominant. But the Clay entering in brick manufacturing must possess and fulfil some specific properties and characteristic such as the ability to be crushed and mixed with water to form a plastic material which can be moulded into various shapes; shrinkage or swelling percentage on firing, meaning when subject to appropriate temperatures the clay particles must fuse together; the bloating characteristics, meaning the percentage of water absorption; firing colour, meaning the colour of the brick after drying and percentage of fines produced upon crushing and fire strength and these physical properties determine their commercial value.

The clays from which burnt bricks are made may be divided into three principal types, all of which have similar chemical compositions but different physical characteristics.

They are:

2. A Surface Clays also called Alluvial and Drift Clays

Found near the surface of the earth, may be the up thrusts of older deposits or of more recent, sedimentary formation; are readily worked and require little preparation.

2. B Shale clays or rocky clays

Shale is sedimentary deposits clays that have been subjected to high pressures until they have hardened almost to the form of slate which are often difficult to work and necessitate the use of heavy machinery to extract but, may be brought into plastic condition by long weathering (i.e. by exposure to rain, frost and sun) or by crushing and grinding in water, and they then resemble ordinary alluvial clays in every respect.

2. C Fire Clays

Fire clays are usually mined at deeper levels of the earth than other clays where they form the bed layer under seams of coal and have refractory qualities and a high degree of resistance to heat.

MANUFACTURING PROCESS

The process of making clay brick is generally uniform, although manufactures tailor their production to fit their particular raw materials.

In general, the manufacturing process consists of essentially of six stages:

Mining and Gathering raw materials

Preparation of raw material (crushing, grinding, screening and mixing the raw materials)

Making of the brick or Forming Process (forming, cutting and coating)

Drying

Curing ( firing and cooling)

Packaging and storing

Diagram of the industrial manufacturing process of clay bricks

MINING and GATHERING RAW MATERIALS

The choice of the mining method of clay will depend on the kind of clay, on the depth, thickness, hardness and physical geology of the clay location under the ground.

The general method of extracting clay from the quarry is once or twice a year using heavy plant machinery to stock pile large amounts, so to ensure continuous brick production regardless of the weather conditions and because clays are rarely present as pure minerals but rather mixtures of the different clay types; laboratory testing of the clays from different parts of quarry will determine the characteristics of the layers and will be stock in separate different categories which will facilitate the blending of the raw materials.

PREPATION OF THE RAW MATERIAL

In the manufacturer, the clay rock is crashed and reduced in smaller particles, and then the material produced is screen through an inclined vibrating screening machine to control the particle sizes prior to water being added.

During the screening, manufactures adjust and compensate the different variations in chemical composition and physical properties by blending clays from different locations and sources to fit their standard of the end product. Consequently, to fulfil their requirements of perfect clay for bricks making, or for the composition of the raw material to fulfil their standard, the different mixes and proportions of clay and chemical are blended together, prior to add water, as which of them affect the working properties of clays causing them to vary in their behaviour affecting the properties of the final product. At the same time, manufacture has standardized their end product and their manufacturing processes to limit variations in the processing and the inconsistency in end product.

For instance, a clay brick that when cure turn white may be developed commercially because, by adding various minerals like oxide of iron will affect the propriety of the brick in such a way that when cure it will produce a red brick if also there is consistency in the manufacturing processes.

Example: Clay containing from 5 to 8 % of oxide of iron will, under ordinary conditions of firing, produce a red brick; but if the clay contains 3 to 4% of alkalis, or the brick is fired too hard, the colour will be darker and purple. An excess of Alumina compound tending to make the colour lighter and brighter.

FORMING OF THE BRICK

The first step in forming process is to produce a homogeneous plastic clay mass work up into proper consistency by adding water to clay in a mixing chamber with one or more revolving shafts with blade extensions. After the kneading, the plastic clay mass is ready for forming.

There are three different methods of shaping and forming brick: the stiff-mud process or extrusion process

6. A. The stiff-mud process or extrusion process

In the stiff-mud process or extrusion process, the clay is mixed with just enough water to produce clay plastic mass with water in the range of 10 to 15 percent of the clay mass. Next, the clay is extruded through a “die”, producing a horizontal column of clay which passes by conveyor belt through an automatic wire cutter to create the individual brick. The cutter spaces and die size are precisely calculated to compensate for shrinkage during drying and firing.

6. B. Soft-mud process

In the soft-mud process or moulded process, the clay contains too much water to be extruded. The plastic clay mass contain 20 to 30 percent of water per mass is used to produce brick either by hand or machine. In the machine driven soft-mud process, standard brick are produce in mass quantities as the machine replicate the hand-making process much quicker.

6. C. Hand making

In the simplest form which is done by hand, the craftsman will produce one brick at the time by stuffing a lump of soft clay in a mould and the excess clay is stuff from the top of the mould and the brick is turned out. The mould is lubricated with either sand or water to prevent the brick from sticking in the mould.

6. D. The dry-press process

In this process hydraulic or compressed air rams is used to press clay with very low plasticity, containing no more than ten percent of water by weight, into steel moulds under pressures from 500 to 1500 psi creating a very compact and dense brick.

DRYING PROCESS

Prior to the brick to be fired in the kiln, after the brick is formed using any of the method describes above, it containing 7 to 30 percent of moisture, depending upon the forming method. This moisture must be removed prior to the brick can be fired in the kiln otherwise, there will be formation of scum and certain mechanical defects from occurring or the brick will explode when the brick is subject to the intense heat of the kiln. This drying process which last about 18 to 40 hours, is normally done by placing the green brick in enclosed dryer which utilize excess heat supplied from the exhaust heat of kiln to maximize thermal efficiency. To ensure good result, devices are installed to measure and control humidity in the drying facilities.

A. Firing

After the drying, the brick are fired in furnace chamber called kiln for 10 to 40 hours, where there are subject to a temperature of ranging between 100 to 1200 degrees centigrade depending on clay type or material used and the type of finished brick required.

During the process, clay particles and impurities will undergo changes as the temperature in the kilns rises. The remaining water in the brick will dry up or evaporate; unlike the metal, clay softens slowly and melts or vitrifies gradually in rising temperature. The clay molecules mass breaks down becomes soft enough to stick together; the mass becomes tight, solid and non absorbent giving the brick it texture and colour. To ensure a good product and avoid the brick to be deformed due to heat also called viscous fusion, kiln is fitted with sensors to control the temperature in the different stage the firing process.

7.A.1. What is a Kiln?

In brief, kilns are just containers for heat; fuelled by natural gas, coal, sawdust, and methane gas from landfills or a combination of these fuels.

There are many different types of kilns but the most common types are the continuous kilns (tunnel) which are always firing; they never cool and are capable of turning out large quantities of bricks at steady constant rate and the periodic (intermittent) kilns which are fired on an intermittent schedule.

http://www.pottery-magic.com/pottery/history/bottle_kiln.htm

PACKAGING

Following the firing process is the packaging but prior to that the bricks are gradually cool down, for 10 hours for tunnel kiln and form 5 to 24 hours in periodic kiln, as the rate of cooling affect directly the final colour of the bricks.

After the brick has cool downs, there are unload from the kiln; sorted, graded, packaged and place in a storage yard or loaded rail cars or truck of delivery.

PART TWO

MANUFACTURING PROCESS OF “ADOBE” CLAY BRICK

The adobe brick, this type of earthen building materials has been around since the beginning of civilisation and has been the main building material for most of the civilisation. In our day, Adobe are mostly used in hot and dry climates and become the characteristic of the third world.

Although this is a very old material, it manufacturing process hasn’t change since. As with the soil clay brick the main ingredient which enter in the manufacturing process is clay and the manufacturing process start with the choice of the raw material.

SELECTION OF RAW MATERIALS

Adobe brick are made from a mixture of mud or clay and small pieces of straw or reeds, and are formed by hand and left in the sun to dry.

The secret of make adobe bricks lays on the choice of the type of clay to use as it is made of surface clay soil. Although the bricks are made in rural area where there is no sophisticated laboratory for testing but prior using the clay it has to be tested.

The testing of the clay can be done by filling 2/3 of a graded glass jar with the clay you plan to use, and then fill the jar with water and put a lid on. Shake the jar for about two minutes making sure the clay is totally mix up with the water then let the jar and the mix to sit overnight. After about 24 hours, examine the jar and its content; the clay would have broken up into two distinct bands of sand on the bottom and clay on the top. There should not be more clay than sand on the ration of 30 percent clay and 70 percent sand for an ideal adobe brick making clay.

EQUIPMENT NEEDED

  • Clay soil
  • Measuring Tape
  • Hammer
  • Hand Saw
  • 2×4 timbers
  • Nails
  • Shovel
  • Bucket
  • Water
  • Straw

PREPARATION OF BRICKS

After selecting the clay, an area must be clear prior to start making bricks and a shed to protect the newly made against the rain as it can take a couple of days for them to dry.

In the nearby, dig a hole of about 3 to 4 feet long, 2 to 3 feet wide and 2 to 3 feet deep as a mixing pit for the different ingredients. Then fill the hole with water and let it drain out as this will strengthen the wall of the hole for it not to crumble while mixing the clay soil. This will take at least a day to dry out. Make mould of the bricks using timber. The traditional size is 4 by 10 by 14 inches and this is made with 2 by 4 studs nailed into a ladder like shape.

MAKING ADOBE BRICKS

Once the water in the pit has dry out, fill the pit halfway with the clay soil then add water gradually as mixing with the feet our shovel until the mix is stiff. Straw can be added to reinforce the mix but it is not necessary.Fill the mould using a shovel or hand thenlevel off the excess with the shovel or with a straight edge, makingsure there are no air pockets or gaps. Let the bricks set and then gently remove the mould from them leaving the wet adobe bricks to dry for several days (at least three) before handling. Wash the mould and repeat the process in a different area.

DRYING PROCESS

Leave the adobe brick where they are while they dry in the sun for several days before turning them on the edge to completely dry out and harden and put under the shed so that the drying time can continue. When the edges turn white, they are ready to be moved, but not used. This process could take at least 3 weeks prior the brick is use.

PART THREE

THE FUTURE OF CLAY BRICK

As the world population is growing especially in developing countries, there is a need of urbanisation to accommodate this populace meaning more bricks are needed to answer to this demand of infrastructure development. With the growing problem of energy price soaring, with the world running out of fossil fuel, with the reduction of deforestation which encourages the expansion of the desert, the clay brick industry is now facing an energy crisis and this crisis is affecting and will affect everyone. In the developed country, it is affecting the price of the accommodation and the house price while in the developing country it is leading to the impoverishment of many. This crisis resound as called for innovation by funding a new way of making new type of clay brick or improving the firing process by a new design of kiln aiming to reduce energy consumption by minimizing the energy required by the process as firing time and temperature in the kiln are the two key factors which contribute in the making of solid brick.

In the developed country, electricity and fossil fuel are use as the main fuel source for brick firing as they are abundant. Founding other alternative to these sources of energy could be the way forward. But investing in nuclear power will raise an environmental issue of dealing with the nuclear waste; investing in the renewable energy will be a gamble in the way that, most of this technology are still in embryonic state and will require funding a good spot to install them and a big area to cover to be able to produce enough energy necessary to power this industries such investment will impair on the price of brick. It will mean also to divert energy which will be helpful to thousand household into industry.

Find Out How UKEssays.com Can Help You!

Our academic experts are ready and waiting to assist with any writing project you may have. From simple essay plans, through to full dissertations, you can guarantee we have a service perfectly matched to your needs.

View our services

UNFIRED CLAY BRICK

The way forward will be probably in reducing the energy consumption by designing better kiln and improving our knowledge of the minimum energy required by the process as unnecessary prolonged firing time and too high temperature will eventually consume more energy but minimum firing temperature and shortening firing time do not only reduce energy but also increase the productivity.

In the developing country, this crisis reverberates as called for innovation, finding an alternative for curing clay brick as they are facing desertification. Curing is done, depending on the area, by fire wood, rice husk and maize cob or residue as main fuel sources for brick firing because they are abundant in developing country. Even though other agricultural waste such as saw dust and oil palm shell are used as substitute for wood, a new design of kiln is necessary to cope with the small size of fuel.

If thinking in term of innovation in finding a new way of making clay brick, the new brick should be energy efficient in manufacturing process especial if cure through a kiln. Although the adobe clay brick may seem to be the answer but this brick however is not very strong or durable and tend to crack on drying.

But one of the modern additions is to compensate this weakness by mixing soil clay with sand and stabilizing it with 4 to 8 % of cement or gypsum and then compress these materials in a given mould form, which results in strong and durable bricks, which do not crack. This is done with simple and yet innovative manually or engine-operated brick presses made from substantial steel sections with “axle steel” shaft with a top round shaft is case hardened carbon steel with a lid and with a bottom that moves up and down; the compression given by the machine compact the soil particles together to make dense regular shaped brick, usually 300x300x 130 mm in size and it is use to produce interlocking soil clay bricks without burning.

MANUFACTURING UNFIRED CLAY BRICKS

This process uses the same type of clay use for the adobe brick. After the soil clay has been selected, it must be properly mix with Portland cement or gypsum then add water to the content so that the final product is a dry mixture containing about 15% water by weight. The dry mixture is poured in the mould of the press machine which is compress by pushing the press lever from one side to the other after closure of the top with a steel lid, with a force of about12 to 14 tons mould pressure. After the compression finish, the brick is eject from the machine and stack in the way to prevent water loss. Water is added daily so that the cement can be hydrated properly. The curing process will take about 28 days. 

ADVANTAGES

This Environmentally-sound building process is practical, inexpensive and environmentallyHYPERLINK “http://www.articlesfactory.com/articles/environment/soil-brick-making-machines-can-save-the-forests.html” HYPERLINK “http://www.articlesfactory.com/articles/environment/soil-brick-making-machines-can-save-the-forests.html”friendly, as well as significant in cost savings and on-going green benefits, building with unfired soil clay bricks is one of the solution for the housing crisis because it has a lot of environmental benefits. Figure 2

The environment is protected in several ways:

  1. It lessens the ecological impact of building construction, thereby reducing deforestation and the need kiln. There is hence no need to burn the bricks, which makes this process a very low-energy requiring one.
  2. It saves money as the brick can be made On-site eliminating transportation, middlemen and breakage cost.
  3. On the other hand, unfired clay brick provide a sustainable and healthy alternative as replacement to conventional masonry materials.
  4. The structures made with soil bricks are as beautiful and durable as housing made from conventional bricks with the higher acoustical qualities that shut out exterior noise for less stressful living and reduce the need to heat or cool the interior. The soil brick is suitable especially for use in multi storey buildings, due to its durability and robustness.
  5. The bricks are already strong enough to be handled for storage when they leave the machine.
  6. Brick presses allow countryside people to build independently their own affordable bricks to self-build their houses and not have to rely on salesmen and production in towns, bad roads, transport problems and fluctuating prices.

CONCLUSION

The lack of fossil fuels the world will face shortly will drive the world in an economical crisis which we haven’t experience before driving up the price of accommodation. Though the idea of compress clay bricks from soil is far from new in the developing country, but for some unknown reasons this technology doesn’t seem to have made its brake through the developed world. There is a need to implement this new product of a low carbon footprint in the building industry.

REFERENCES

http://sleekfreak.ath.cx:81/3wdev/VITAHTML/SUBLEV/EN1/CLAYPROD.HTM

/how_242553_.html

www.ibstock.com/pdfs/technical…/TIS16howbrickaremade

http://www.articlesfactory.com/articles/environment/soil-brick-making-machines-can-save-the-forests.html

http://www.newdawnengineering.com/website/brickandtile/tbrick/

http://opus.bath.ac.uk/16170/1/papers/Paper%2031.pdf

www.bia.org/bia/technotes/t9.html

REPORT:

Manufacturing of Bricks 9.12.2006

Publish: The Brick Industry Association

www.gobrick.com/omnisam/common/getfile.cfm?file=/bia/technotes/t9…

Access 20.03.2010

Careful humidity control

Publish: Vaisala news 1998

Www. Vaisala.com

Access 24.03.10

ABCs of making Adobe bricks

Publish: College of agriculture and home economics

New Mexico state university March 2003

www.aces.nmsu.edu

Access 24.03.10

Websites

Mineral information institute

www.mii.org

16.03.10

Bright Hub

www.brighthub.com

13.03.10

University College London

www.es.ucl.ac.uk

13.03.10

Answer.com/reference answer

www.answer.com

17.03.2010

How to make adobe bricks

www.ehow.com

17.03.2010

How to make Adobe bricks

www.doityourself.com

07.04.2010

 

Cite This Work

To export a reference to this article please select a referencing stye below:

Reference Copied to Clipboard.
Reference Copied to Clipboard.
Reference Copied to Clipboard.
Reference Copied to Clipboard.
Reference Copied to Clipboard.
Reference Copied to Clipboard.
Reference Copied to Clipboard.

Related Services

View all

DMCA / Removal Request

If you are the original writer of this essay and no longer wish to have your work published on UKEssays.com then please: