Whenever data is exchanged electronically many times the privacy of the data is a required. Encryption is used to restrict unintended recipients from viewing the data, which are deemed confidential and potentially dangerous if made known to irresponsible parties. In other word, encryption is the procedure of transforming plain text data that can be read by anyone to cipher text data that can only be read by someone with a secret decryption key.A message before being changed in any way is called plain text. Plain text messages are converted to ciphertext via some encryption method. An enryption method is called a cryptosystem.
If you need assistance with writing your essay, our professional essay writing service is here to help!Essay Writing Service
In 1972, the National Bureau of Standards (NBS), a part of the U.S. Department of Commerce, initiated a program to develop standards for the protection of computer data. The Institute for Computer Sciences and Technology (ICST), one of the major operating units of the National Bureau of Standards, had been recently established in response to a 1965 federal law known as the Brooks Act (PL89-306) that required new standards for improving utilization of computers by the federal government. Computer security had been identified by an ICST study as one of the high-priority areas requiring standards if computers were to be effectively used. A set of guidelines and standards were defined by the ICST that were to be developed as resources became available in computer security. The guidelines were to include areas such as physical security, risk management, contingency planning, and security auditing. Guidelines were adequate in areas not requiring interoperability among various computers. Standards were required in areas such as encryption, personal authentication, access control, secure data stor-age, and transmission because they could affect interoperability.
Standards can be divided into different sections: basic, interoperability, interface, and implementation.
1. Basic standards (also called 4’standards of good practice”) are used to specify generic functions (services, methods, results) required to achieve a certain set of common goals. Examples include standards for purity of chemicals, contents of food products, and in the computer field, structured programming practices.
2. Interoperability standards specify functions and formats so that data transmitted from one computer can be properly acted on when received by another computer.The implementation (hardware, firmware, software) or structure (integrated, isolated, interfaced layers) need not be specified in interoperability standards, since there is no intent of replacing one implementation or structure within a system with another.
3. Interface standards specify not only the function and format of data crossing the interface, but also include physical, electrical, and logical specifications sufficient to replace one implementation (device, program, component) on either side of the interface with another.
4. Implementation standards not only specify the interfaces, functions, and formats, but also the structure and the method of implementation. These may be necessary to assure that secondary characteristics such as speed, reliability, physical security, etc. also meet certain needs. Such standards are often used to permit component replacement in an overall system.
Services or Applications
The basic DES algorithm can be used for both data encryption and data authentication.
1. Data Encryption: It is easy to see how the DES may be used to encrypt a 64-bit plaintext input to a 64-bit cipher text output, but data are seldom limited to 64 bits. In order to use DES in a variety of cryptographic applications, four modes of operation were developed: electronic codebook (ECB); cipher feedback (CFB); cipher block chaining (CBC); and output feedback (OFB)  (Figs. 1-4). Each mode has its advantages and disadvantages. ECB is excellent for encrypting keys; CFB is typically used for encrypting individual characters; and OFB is often used for encrypting satellite communications. Both CBC and CFB can be used to authenticate data. These modes of operation permit the use of DES for interactive terminal to host encryption, crypto-graphic key encryption for automated key management applications, file encryption, mail encryption, satellite data encryption, and other applications. In fact, it is extremely difficult, if not impossible, to find a cryptographic application where the DES cannot be applied.
Figure 1: Electronic codebook (ECB) mode.
Figure2: Cipher block chaining (CBC) mode.
History of encryption
In its earliest form, people have been attempting to conceal certain information that they wanted to keep to their own possession by substituting parts of the information with symbols, numbers and pictures. Ancient Babylonian merchants used intaglio, a piece of flat stone carved into a collage of images and some writing to identify themselves in trading transactions. Using this mechanism, they are producing what today we know as ‘digital signature.’ The public knew that a particular ‘signature’ belonged to this trader, but only he had the intaglio to produce that signature.
Of course, technology today has evolved at such rapid pace that the need to protect information grows with the lessening reliability of older encryption techniques. Basic modern encryption is not much different from the ancient civilisations’ substitution using symbols. Translation table, lends itself very well in making a piece of data generally unreadable. However computers today are much too advanced that translation table is easily broken and thus no longer viable. Instead encryption today has grown into such specialised field that involve mathematical, non-linear cryptosystem that even a relatively powerful computers take months or even years to break the ciphertext.
The origins of DES go back to the early 1970s. In 1972, after concluding a study on the US government’s computer security needs, the US standards body NBS (National Bureau of Standards) – now named NIST (National Institute of Standards and Technology) – identified a need for a government-wide standard for encrypting unclassified, sensitive information. Accordingly, on 15 May 1973, after consulting with the NSA, NBS solicited proposals for a cipher that would meet rigorous design criteria. None of the submissions, however, turned out to be suitable. A second request was issued on 27 August 1974. This time, IBM submitted a candidate which was deemed acceptable – a cipher developed during the period 1973-1974 based on an earlier algorithm, Horst Feistel’s Lucifer cipher. The team at IBM involved in cipher design and analysis included Feistel, Walter Tuchman, Don Coppersmith, Alan Konheim, Carl Meyer, Mike Matyas, Roy Adler, Edna Grossman, Bill Notz, Lynn Smith, and Bryant Tuckerman.
NSA’s involvement in the design
On 17 March 1975, the proposed DES was published in the Federal Register. Public comments were requested, and in the following year two open workshops were held to discuss the proposed standard. There was some criticism from various parties, including from public-key cryptography pioneers Martin Hellman and Whitfield Diffie, citing a shortened key length and the mysterious “S-boxes” as evidence of improper interference from the NSA. The suspicion was that the algorithm had been covertly weakened by the intelligence agency so that they – but no-one else – could easily read encrypted messages. Alan Konheim (one of the designers of DES) commented, “We sent the S-boxes off to Washington. They came back and were all different.” The United States Senate Select Committee on Intelligence reviewed the NSA’s actions to determine whether there had been any improper involvement. In the unclassified summary of their findings, published in 1978, the Committee wrote:
In the development of DES, NSA convinced IBM that a reduced key size was sufficient; indirectly assisted in the development of the S-box structures; and certified that the final DES algorithm was, to the best of their knowledge, free from any statistical or mathematical weakness.
However, it also found that
NSA did not tamper with the design of the algorithm in any way. IBM invented and designed the algorithm, made all pertinent decisions regarding it, and concurred that the agreed upon key size was more than adequate for all commercial applications for which the DES was intended.
Another member of the DES team, Walter Tuchman, stated “We developed the DES algorithm entirely within IBM using IBMers. The NSA did not dictate a single wire!” In contrast, a declassified NSA book on cryptologic history states:
In 1973 NBS solicited private industry for a data encryption standard (DES). The first offerings were disappointing, so NSA began working on its own algorithm. Then Howard Rosenblum, deputy director for research and engineering, discovered that Walter Tuchman of IBM was working on a modification to Lucifer for general use. NSA gave Tuchman a clearance and brought him in to work jointly with the Agency on his Lucifer modification.”and NSA worked closely with IBM to strengthen the algorithm against all except brute force attacks and to strengthen substitution tables, called S-boxes. Conversely, NSA tried to convince IBM to reduce the length of the key from 64 to 48 bits. Ultimately they compromised on a 56-bit key.
Some of the suspicions about hidden weaknesses in the S-boxes were allayed in 1990, with the independent discovery and open publication by Eli Biham and Adi Shamir of differential cryptanalysis, a general method for breaking block ciphers. The S-boxes of DES were much more resistant to the attack than if they had been chosen at random, strongly suggesting that IBM knew about the technique in the 1970s. This was indeed the case; in 1994, Don Coppersmith published some of the original design criteria for the S-boxes. According to Steven Levy, IBM Watson researchers discovered differential cryptanalytic attacks in 1974 and were asked by the NSA to keep the technique secret. Coppersmith explains IBM’s secrecy decision by saying, “that was because [differential cryptanalysis] can be a very powerful tool, used against many schemes, and there was concern that such information in the public domain could adversely affect national security.” Levy quotes Walter Tuchman: “[t]he asked us to stamp all our documents confidential… We actually put a number on each one and locked them up in safes, because they were considered U.S. government classified. They said do it. So I did it”. Bruce Schneier observed that “It took the academic community two decades to figure out that the NSA ‘tweaks’ actually improved the security of DES.”
Encryption Now a Days
Industrial espionage among highly competitive businesses often requires that extensive security measures be put into place. And, those who wish to exercise their personal freedom, outside of the oppressive nature of governments, may also wish to encrypt certain information to avoid legalities that entailed possession of such.
With respect to the Internet, there are many types of data and messages that people would want to be kept secret. Now that commercial trading on the Net is a reality, one of the main targets of data encryption is credit card numbers. Other information that could otherwise benefit or educate a group or individual can also be used against such groups or individuals.
Security Problems That Encryption Does Not Solve
While there are many good reasons to encrypt data, there are many reasons not to encrypt data. Encryption does not solve all security problems, and may make some problems worse. The following sections describe some misconceptions about encryption of stored data:
â€¢ Principle 1: Encryption Does Not Solve Access Control Problems
â€¢ Principle 2: Encryption Does Not Protect Against a Malicious Database Administrator
â€¢ Principle 3: Encrypting Everything Does Not Make Data Secure
Principle 1: Encryption Does Not Solve Access Control Problems
Most organizations must limit data access to users who must see this data. For example, a human resources system may limit employees to viewing only their own employment records, while allowing managers of employees to see the employment records of subordinates. Human resource specialists may also need to see employee records for multiple employees.
Typically, you can use access control mechanisms to address security policies that limit data access to those with a need to see it. Oracle Database has provided strong, independently evaluated access control mechanisms for many years. It enables access control enforcement to a fine level of granularity through Virtual Private Database.
Because human resource records are considered sensitive information, it is tempting to think that all information should be encrypted for better security. However, encryption cannot enforce granular access control, and it may hinder data access. For example, an employee, his manager, and a human resources clerk may all need to access an employee record. If all employee data is encrypted, then all three must be able to access the data in unencrypted form. Therefore, the employee, the manager and the human resources clerk would have to share the same encryption key to decrypt the data. Encryption would, therefore, not provide any additional security in the sense of better access control, and the encryption might hinder the proper or efficient functioning of the application. An additional issue is that it is difficult to securely transmit and share encryption keys among multiple users of a system.
A basic principle behind encrypting stored data is that it must not interfere with access control. For example, a user who has the SELECT privilege on emp should not be limited by the encryption mechanism from seeing all the data he is otherwise allowed to see. Similarly, there is little benefit to encrypting part of a table with one key and part of a table with another key if users must see all encrypted data in the table. In this case, encryption adds to the overhead of decrypting the data before users can read it. If access controls are implemented well, then encryption adds little additional security within the database itself. A user who has privileges to access data within the database has no more nor any less privileges as a result of encryption. Therefore, you should never use encryption to solve access control problems.
Principle 2: Encryption Does Not Protect Against a Malicious Database Administrator
Some organizations, concerned that a malicious user might gain elevated (database administrator) privileges by guessing a password, like the idea of encrypting stored data to protect against this threat. However, the correct solution to this problem is to protect the database administrator account, and to change default passwords for other privileged accounts. The easiest way to break into a database is by using a default password for a privileged account that an administrator allowed to remain unchanged. One example is SYS/CHANGE_ON_INSTALL.
While there are many destructive things a malicious user can do to a database after gaining the DBA privilege, encryption will not protect against many of them. Examples include corrupting or deleting data, exporting user data to the file system to e-mail the data back to himself to run a password cracker on it, and so on.
Some organizations are concerned that database administrators, typically having all privileges, are able to see all data in the database. These organizations feel that the database administrators should administer the database, but should not be able to see the data that the database contains. Some organizations are also concerned about concentrating so much privilege in one person, and would prefer to partition the DBA function, or enforce two-person access rules.
It is tempting to think that encrypting all data (or significant amounts of data) will solve these problems, but there are better ways to protect against these threats. For example, Oracle Database supports limited partitioning of DBA privileges. Oracle Database provides native support for SYSDBA and SYSOPER users. SYSDBA has all privileges, but SYSOPER has a limited privilege set (such as startup and shutdown of the database).
Furthermore, you can create smaller roles encompassing several system privileges. A jr_dba role might not include all system privileges, but only those appropriate to a junior database administrator (such as CREATE TABLE, CREATE USER, and so on).
Oracle Database also enables auditing the actions taken by SYS (or SYS-privileged users) and storing that audit trail in a secure operating system location. Using this model, a separate auditor who has root privileges on the operating system can audit all actions by SYS, enabling the auditor to hold all database administrators accountable for their actions.
See “Auditing SYS Administrative Users” for information about ways to audit database administrators.
You can also fine-tune the access and control that database administrators have by using Oracle Database Vault. See Oracle Database Vault Administrator’s Guide for more information.
The database administrator function is a trusted position. Even organizations with the most sensitive data, such as intelligence agencies, do not typically partition the database administrator function. Instead, they manage their database administrators strongly, because it is a position of trust. Periodic auditing can help to uncover inappropriate activities.
Encryption of stored data must not interfere with the administration of the database, because otherwise, larger security issues can result. For example, if by encrypting data you corrupt the data, then you create a security problem, the data itself cannot be interpreted, and it may not be recoverable.
You can use encryption to limit the ability of a database administrator or other privileged user to see data in the database. However, it is not a substitute for managing the database administrator privileges properly, or for controlling the use of powerful system privileges. If untrustworthy users have significant privileges, then they can pose multiple threats to an organization, some of them far more significant than viewing unencrypted credit card numbers.
Principle 3: Encrypting Everything Does Not Make Data Secure
A common error is to think that if encrypting some data strengthens security, then encrypting everything makes all data secure.
As the discussion of the previous two principles illustrates, encryption does not address access control issues well, and it is important that encryption not interfere with normal access controls. Furthermore, encrypting an entire production database means that all data must be decrypted to be read, updated, or deleted. Encryption is inherently a performance-intensive operation; encrypting all data will significantly affect performance.
Our academic experts are ready and waiting to assist with any writing project you may have. From simple essay plans, through to full dissertations, you can guarantee we have a service perfectly matched to your needs.View our services
Availability is a key aspect of security. If encrypting data makes data unavailable, or adversely affects availability by reducing performance, then encrypting everything will create a new security problem. Availability is also adversely affected by the database being inaccessible when encryption keys are changed, as good security practices require on a regular basis. When the keys are to be changed, the database is inaccessible while data is decrypted and re-encrypted with a new key or keys.
There may be advantages to encrypting data stored off-line. For example, an organization may store backups for a period of 6 months to a year off-line, in a remote location. Of course, the first line of protection is to secure the facility storing the data, by establishing physical access controls. Encrypting this data before it is stored may provide additional benefits. Because it is not being accessed on-line, performance need not be a consideration. While an Oracle database does not provide this capability, there are vendors who provide encryption services. Before embarking on large-scale encryption of backup data, organizations considering this approach should thoroughly test the process. It is essential to verify that data encrypted before off-line storage can be decrypted and re-imported successfully.
EFS technology makes it so that files encrypted by one user cannot be opened by another user if the latter does not possess appropriate permissions. After encryption is activated, the file remains encrypted in any storage location on the disk, regardless of where it is moved. Encryption is can be used on any files, including executables.
The user with permission to decrypt a file is able to work with the file like with any other, without experiencing any restrictions or difficulties. Meanwhile, other users receive a restricted access notification when they attempt to access the EFS encrypted file.
This approach is definitely very convenient. The user gets the opportunity to reliably and quickly (using standard means) limit access to confidential information for other household members or colleagues who also use the computer.
EFS seems like an all-around winning tool, but this is not the case. Data encrypted using this technology can be entirely lost, for example during operating system reinstallation.
We should remember that the files on disk are encrypted using the FEK (File Encryption Key), which is stored in their attributes. FEK is encrypted using the master key, which in turn is encrypted using the respective keys of the system users with access to the file. The user keys themselves are encrypted with the users’ password hashes, and the password hashes use the SYSKEY security feature.
This chain of encryption, according to EFS developers, should reliably protect data, but in practice, as explained below, the protection can be ultimately reduced to the good old login-pass-word combination.
Thanks to this encryption chain, if the password is lost or reset, or if the operating system fails or is reinstalled, it becomes impossible to gain access to the EFS-encrypted files on the drive. In fact, access can be lost irreversibly.
Regular users do not fully understand how EFS works and often pay for it when they lose their data. Microsoft has issued EFS documentation that explains how it works and the main issues that may be encountered when encrypting, but these are difficult for regular users to understand, and few read the documentation before starting to work.
Data Encryption Challenges
In cases where encryption can provide additional security, there are some associated technical challenges, as described in the following sections:
â€¢ Encrypting Indexed Data
â€¢ Generating Encryption Keys
â€¢ Transmitting Encryption Keys
â€¢ Storing Encryption Keys
â€¢ Changing Encryption Keys
â€¢ Encrypting Binary Large Objects
Encrypting Indexed Data
Special difficulties arise when encrypted data is indexed. For example, suppose a company uses a national identity number, such as the U.S. Social Security number (SSN), as the employee number for its employees. The company considers employee numbers to be sensitive data, and, therefore, wants to encrypt data in the employee_number column of the employees table. Because employee_number contains unique values, the database designers want to have an index on it for better performance.
However, if DBMS_CRYPTO or the DBMS_OBFUSCATION_TOOLKIT (or another mechanism) is used to encrypt data in a column, then an index on that column will also contain encrypted values. Although an index can be used for equality checking (for example, SELECT * FROM emp WHERE employee_number = ‘987654321’), if the index on that column contains encrypted values, then the index is essentially unusable for any other purpose. You should not encrypt indexed data.
Oracle recommends that you do not use national identity numbers as unique IDs. Instead, use the CREATE SEQUENCE statement to generate unique identity numbers. Reasons to avoid using national identity numbers are as follows:
â€¢ There are privacy issues associated with overuse of national identity numbers (for example, identity theft).
â€¢ Sometimes national identity numbers can have duplicates, as with U.S. Social Security numbers.
Generating Encryption Keys
Encrypted data is only as secure as the key used for encrypting it. An encryption key must be securely generated using secure cryptographic key generation. Oracle Database provides support for secure random number generation, with the RANDOMBYTES function of DBMS_CRYPTO. (This function replaces the capabilities provided by the GetKey procedure of the earlier DBMS_OBFUSCATION_TOOLKIT.) DBMS_CRYPTO calls the secure random number generator (RNG) previously certified by RSA Security.
Do not use the DBMS_RANDOM package. The DBMS_RANDOM package generates pseudo-random numbers, which, as Randomness Recommendations for Security (RFC-1750) states that using pseudo-random processes to generate secret quantities can result in pseudo-security.
Be sure to provide the correct number of bytes when you encrypt a key value. For example, you must provide a 16-byte key for the ENCRYPT_AES128 encryption algorithm.
Transmitting Encryption Keys
If the encryption key is to be passed by the application to the database, then you must encrypt it. Otherwise, an intruder could get access to the key as it is being transmitted. Network encryption, such as that provided by Oracle Advanced Security, protects all data in transit from modification or interception, including cryptographic keys.
Storing Encryption Keys
Storing encryption keys is one of the most important, yet difficult, aspects of encryption. To recover data encrypted with a symmetric key, the key must be accessible to an authorized application or user seeking to decrypt the data. At the same time, the key must be inaccessible to someone who is maliciously trying to access encrypted data that he is not supposed to see.
The options available to a developer are:
Storing the Encryption Keys in the Database
Storing the Encryption Keys in the Operating System
Users Managing Their Own Encryption Keys
Using Transparent Database Encryption and Table space Encryption
Storing the Encryption Keys in the Database
Storing the keys in the database cannot always provide infallible security if you are trying to protect against the database administrator accessing encrypted data. An all-privileged database administrator could still access tables containing encryption keys. However, it can often provide good security against the casual curious user or against someone compromising the database file on the operating system.
As a trivial example, suppose you create a table (EMP) that contains employee data. You want to encrypt the employee Social Security number (SSN) stored in one of the columns. You could encrypt employee SSN using a key that is stored in a separate column. However, anyone with SELECT access on the entire table could retrieve the encryption key and decrypt the matching SSN.
While this encryption scheme seems easily defeated, with a little more effort you can create a solution that is much harder to break. For example, you could encrypt the SSN using a technique that performs some additional data transformation on the employee_number before using it to encrypt the SSN. This technique might be as simple as using an XOR operation on the employee_number and the birth date of the employee to determine the validity of the values.
As additional protection, PL/SQL source code performing encryption can be wrapped, (using the WRAP utility) which obfuscates (scrambles) the code. The WRAP utility processes an input SQL file and obfuscates the PL/SQL units in it. For example, the following command uses the keymanage.sql file as the input:
A developer can subsequently have a function in the package call the DBMS_OBFUSCATION_TOOLKIT with the key contained in the wrapped package.
Oracle Database enables you to obfuscate dynamically generated PL/SQL code. The DBMS_DDL package contains two subprograms that allow you to obfuscate dynamically generated PL/SQL program units. For example, the following block uses the DBMS_DDL.CREATE_WRAPPED procedure to wrap dynamically generated PL/SQL code.
While wrapping is not unbreakable, it makes it harder for an intruder to get access to the encryption key. Even in cases where a different key is supplied for each encrypted data value, you should not embed the key value within a package. Instead, wrap the package that performs the key management (that is, data transformation or padding).
An alternative to wrapping the data is to have a separate table in which to store the encryption key and to envelope the call to the keys table with a procedure. The key table can be joined to the data table using a primary key to foreign key relationship. For example, employee_number is the primary key in the employees table that stores employee information and the encrypted SSN. The employee_number column is a foreign key to the ssn_keys table that stores the encryption keys for the employee SSN. The key stored in the ssn_keys table can also be transformed before use (by using an XOR operation), so the key itself is not stored unencrypted. If you wrap the procedure, then that can hide the way in which the keys are transformed before use.
The strengths of this approach are:
â€¢ Users who have direct table access cannot see the sensitive data unencrypted, nor can they retrieve the keys to decrypt the data.
â€¢ Access to decrypted data can be controlled through a procedure that selects the encrypted data, retrieves the decryption key from the key table, and transforms it before it can be used to decrypt the data.
â€¢ The data transformation algorithm is hidden from casual snooping by wrapping the procedure, which obfuscates the procedure code.
â€¢ SELECT access to both the data table and the keys table does not guarantee that the user with this access can decrypt the data, because the key is transformed before use.
The weakness to this approach is that a user who has SELECT access to both the key table and the data table, and who can derive the key transformation algorithm, can break the encryption scheme.
The preceding approach is not infallible, but it is adequate to protect against easy retrieval of sensitive information stored in clear text.
Storing the Encryption Keys in the Operating System
Storing keys in a flat file in the operating system is another option. Oracle Database enables you to make callouts from PL/SQL, which you could use to retrieve encryption keys. However, if you store keys in the operating system and make callouts to it, then your data is only as secure as the protection on the operating system. If your primary security concern is that the database can be broken into from the operating system, then storing the keys in the operating system makes it easier for an intruder to retrieve encrypted data than storing the keys in the database itself.
Users Managing Their Own Encryption Keys
Using Transparent Database Encryption and Table space Encryption
Transparent database encryption and table space encryption provide secu
Cite This Work
To export a reference to this article please select a referencing stye below:
Related ServicesView all
DMCA / Removal Request
If you are the original writer of this essay and no longer wish to have your work published on UKEssays.com then please: